The Wooden Case
For the wooden case, you will need to cut it from a sheet of 3mm thick wood.
​
It can be purchased from Ponoko or RazorLab and the design files can be found via the button above.
If using these services, you will need to use a P2 sized sheet of plywood.
​
The design files include two sets of all the buttons so if you lose, break, or ruin them, you get a second chance.
You will also get a bunch of scrap pieces, hold onto them, they're good for testing wood stains and varnishes.
​
Make sure you have received all of the parts and contact the laser cutters if any are missing or broken.
​
The pieces are made from thin wood so they will be fragile until they are glued together.
​
Use your wood glue of choice and follow the directions it gives.
​
​
​
​
